{pboot:if('

Performance advantages:
 1. Easy to use: This product has low viscosity and does not leave sludge. After application, the solvent evaporates moderately, preventing dripping after application, making the whole process clean and hygienic without leaving stains.
 2. Long anti-rust period: Leaves a thin layer of dry film with strong protective performance on the metal surface. The film has good rust resistance and protection ability, and can resist the chemical erosion of solid particulate matter. It has good permeability, which enables it to penetrate into the fine cracks that are difficult for general rust inhibitors to reach, and it is truly foolproof.
 3. Low cost: Due to its volatility, the oil film is extremely thin and the amount used is small. 50-60m3 can be applied per liter, and the unit cost is low.
 4. Easy to clean: The oil film formed on the metal surface can be cleaned with petroleum solvents or kerosene.

Scope of application:
 It can be widely used for rust prevention of various types of steel, hardware parts, mechanical products and other metals. It provides a rust prevention period of more than 1.5 years.

 

Technical indicators:

Test items	Performance indicators
Appearance	brown transparent
Process requirements	Golden oil film
Workpiece type	Large parts
Oil film requirements	yhard model
Anti-rust period (months)	12
Viscosity at 40℃mm㎡/s	not applicable
Copper corrosion 100℃	not applicable
Salt spray test 45# steel, hours	≥6
Wet heat test 45# steel, day	≥30

'!='')}

Hard film rust preventive NW-P193

{/pboot:if} {pboot:if('

Performance advantages:
 1. Easy to use: This product has low viscosity and does not leave sludge. After application, the solvent evaporates moderately, preventing dripping after application, making the whole process clean and hygienic without leaving stains.
 2. Long anti-rust period: Leaves a thin layer of dry film with strong protective performance on the metal surface. The film has good rust resistance and protection ability, and can resist the chemical erosion of solid particulate matter. It has good permeability, which enables it to penetrate into the fine cracks that are difficult for general rust inhibitors to reach, and it is truly foolproof.
 3. Low cost: Due to its volatility, the oil film is extremely thin and the amount used is small. 50-60m3 can be applied per liter, and the unit cost is low.
 4. Easy to clean: The oil film formed on the metal surface can be cleaned with petroleum solvents or kerosene.

Scope of application:
 It can be widely used for rust prevention of various types of steel, hardware parts, mechanical products and other metals. It provides a rust prevention period of more than 1.5 years.

 

Technical indicators:

Test items	Performance indicators
Appearance	brown transparent
Process requirements	Golden oil film
Workpiece type	Large parts
Oil film requirements	yhard model
Anti-rust period (months)	12
Viscosity at 40℃mm㎡/s	not applicable
Copper corrosion 100℃	not applicable
Salt spray test 45# steel, hours	≥6
Wet heat test 45# steel, day	≥30

'!='')}

{/pboot:if}

Performance advantages:
 1. Easy to use: This product has low viscosity and does not leave sludge. After application, the solvent evaporates moderately, preventing dripping after application, making the whole process clean and hygienic without leaving stains.
 2. Long anti-rust period: Leaves a thin layer of dry film with strong protective performance on the metal surface. The film has good rust resistance and protection ability, and can resist the chemical erosion of solid particulate matter. It has good permeability, which enables it to penetrate into the fine cracks that are difficult for general rust inhibitors to reach, and it is truly foolproof.
 3. Low cost: Due to its volatility, the oil film is extremely thin and the amount used is small. 50-60m3 can be applied per liter, and the unit cost is low.
 4. Easy to clean: The oil film formed on the metal surface can be cleaned with petroleum solvents or kerosene.

Scope of application:
 It can be widely used for rust prevention of various types of steel, hardware parts, mechanical products and other metals. It provides a rust prevention period of more than 1.5 years.

 

Technical indicators:

Test items	Performance indicators
Appearance	brown transparent
Process requirements	Golden oil film
Workpiece type	Large parts
Oil film requirements	yhard model
Anti-rust period (months)	12
Viscosity at 40℃mm㎡/s	not applicable
Copper corrosion 100℃	not applicable
Salt spray test 45# steel, hours	≥6
Wet heat test 45# steel, day	≥30