{pboot:if('

Performance advantages:

            1. Excellent noise reduction and adhesion performance: high viscosity base oil combined with a variety of tackifiers ensures that the product will not fall off even at high speeds.
               2. Excellent pumpability: has significant advantages in concentrated grease supply areas.

Main uses:
          General lithium-based grease is a multi-purpose lubricant used in general factories. It is suitable for bearings, gears, slide rails, joints and other parts that require high grease adhesion and pumpability. HZ000/00/0/1 is suitable for centralized grease supply systems such as cement mixing station centralized grease supply system and pump truck centralized grease supply system. HZ2/3 is suitable for joint connection parts such as excavator and bulldozer arm joint pins. The applicable temperature range during continuous operation is -20~120℃, and the maximum short-term use temperature is 150℃.

Precautions:
          1. When using this product, the lubrication parts must be cleaned to avoid contamination.
          2. It cannot be mixed with greases of different brands and types.
      3. Do not mix with waste grease.

Typical data:

project	000#	00#	0#	1#	2#	2#	Test method
Appearance	Yellow uniform ointment						Visual inspection
Cone penetration/0.1mm	450	410	370	320	275	230	GB/T 269
Dropping point/℃	160		180				GB/T 3498
Corrosion (45# steel 100℃ 3h)	qualified						SH/T 0331
Steel mesh oil separation (100℃ 24h) /%	-	-	-	2.5	2	1.5	SH/T 0324

'!='')}

Universal lithium-based grease

{/pboot:if} {pboot:if('

Performance advantages:

            1. Excellent noise reduction and adhesion performance: high viscosity base oil combined with a variety of tackifiers ensures that the product will not fall off even at high speeds.
               2. Excellent pumpability: has significant advantages in concentrated grease supply areas.

Main uses:
          General lithium-based grease is a multi-purpose lubricant used in general factories. It is suitable for bearings, gears, slide rails, joints and other parts that require high grease adhesion and pumpability. HZ000/00/0/1 is suitable for centralized grease supply systems such as cement mixing station centralized grease supply system and pump truck centralized grease supply system. HZ2/3 is suitable for joint connection parts such as excavator and bulldozer arm joint pins. The applicable temperature range during continuous operation is -20~120℃, and the maximum short-term use temperature is 150℃.

Precautions:
          1. When using this product, the lubrication parts must be cleaned to avoid contamination.
          2. It cannot be mixed with greases of different brands and types.
      3. Do not mix with waste grease.

Typical data:

project	000#	00#	0#	1#	2#	2#	Test method
Appearance	Yellow uniform ointment						Visual inspection
Cone penetration/0.1mm	450	410	370	320	275	230	GB/T 269
Dropping point/℃	160		180				GB/T 3498
Corrosion (45# steel 100℃ 3h)	qualified						SH/T 0331
Steel mesh oil separation (100℃ 24h) /%	-	-	-	2.5	2	1.5	SH/T 0324

'!='')}

{/pboot:if}

Performance advantages:

            1. Excellent noise reduction and adhesion performance: high viscosity base oil combined with a variety of tackifiers ensures that the product will not fall off even at high speeds.
               2. Excellent pumpability: has significant advantages in concentrated grease supply areas.

Main uses:
          General lithium-based grease is a multi-purpose lubricant used in general factories. It is suitable for bearings, gears, slide rails, joints and other parts that require high grease adhesion and pumpability. HZ000/00/0/1 is suitable for centralized grease supply systems such as cement mixing station centralized grease supply system and pump truck centralized grease supply system. HZ2/3 is suitable for joint connection parts such as excavator and bulldozer arm joint pins. The applicable temperature range during continuous operation is -20~120℃, and the maximum short-term use temperature is 150℃.

Precautions:
          1. When using this product, the lubrication parts must be cleaned to avoid contamination.
          2. It cannot be mixed with greases of different brands and types.
      3. Do not mix with waste grease.

Typical data:

project	000#	00#	0#	1#	2#	2#	Test method
Appearance	Yellow uniform ointment						Visual inspection
Cone penetration/0.1mm	450	410	370	320	275	230	GB/T 269
Dropping point/℃	160		180				GB/T 3498
Corrosion (45# steel 100℃ 3h)	qualified						SH/T 0331
Steel mesh oil separation (100℃ 24h) /%	-	-	-	2.5	2	1.5	SH/T 0324