Fully synthetic magnesium alloy cutting fluid
产品应用：本品专为镁合金加工设计的全合成水溶性加工液，先进的中性配方体系，对镁合金保护好，以及与人体皮肤有良好 的适应性，由不同类型防锈剂复配、PH 稳定剂、润滑剂等添加剂调配而成，具有优异的镁合金保护性能，同时具有良好 的润滑、清洗和冷却能。可用于镁合金、铝合金和铜的切削、攻丝等加工工艺。同时，抗硬水性能优越。也安全环保， 不含氯，亚硝酸盐，苯酚等有害物质。
产品介绍
Performance advantages:
1. Excellent magnesium alloy protection performance---Adopting advanced neutral formula system, good magnesium alloy protection
2. Good lubrication performance---Adding high-efficiency lubricating extreme pressure additives with excellent system facilitates its good lubrication effect, which can make the workpiece obtain excellent surface finish; non-stick tool, not easy to produce built-up edge, effectively prolong the service life of the tool. Applicable to tapping and drilling
3. Good cooling and cleaning performance---During the cutting and grinding process, it can effectively clean the debris generated during the process, ensuring that the machine and product surface are clean and non-adhesive, and the product itself is easy to clean, while taking away a lot of heat generated during the process
4. Good resistance to foreign oil---It is incompatible with foreign oils such as guide rail oil and anti-rust oil, and the surface floating oil is easy to skim
5. Safety and environmental protection---This product does not contain harmful substances such as phenol, chlorine, nitrite, etc., protects personnel health, and is a neutral system with good adaptability to human skin.
6. Good resistance to hard water, can adapt to hard water with a hardness of more than 5000ppm
7. Good sedimentation---It can effectively settle the grinding chips to avoid secondary grinding and damage to the grinding wheel.
Scope of application:
Fully synthetic magnesium alloy cutting fluid is suitable for the processing of various magnesium alloys, aluminum alloys and zinc alloys.
It can be used for turning, cutting, grinding and drilling.
Precautions:
Customers can choose the appropriate water-to-water ratio according to their own processing material requirements to reduce waste. Generally, the higher the concentration, the better the anti-rust and lubrication effect.
It is normal for the original liquid to have a slight yellowing appearance after being stored for a long time, which will not affect the processing effect
Do not mix it with other cutting fluids when using it. When adding liquid, please add the original liquid and water in proportion. Do not add water directly.
Technical indicators:
Test items | Detection method | Performance indicators |
Appearance | Visual inspection | Light yellow transparent liquid |
5% dilution pH | GB/T 6144-2010 | 8.1±0.3 |
Refractometer coefficient | BRIX concentration meter method | 2.3±0.2 |
Corrosion test/single chip | GB/T 6144-2010 | Grade 1 (rust-free) |
Fully synthetic magnesium alloy cutting fluid
{/pboot:if} {pboot:if('Performance advantages:
1. Excellent magnesium alloy protection performance---Adopting advanced neutral formula system, good magnesium alloy protection
2. Good lubrication performance---Adding high-efficiency lubricating extreme pressure additives with excellent system facilitates its good lubrication effect, which can make the workpiece obtain excellent surface finish; non-stick tool, not easy to produce built-up edge, effectively prolong the service life of the tool. Applicable to tapping and drilling
3. Good cooling and cleaning performance---During the cutting and grinding process, it can effectively clean the debris generated during the process, ensuring that the machine and product surface are clean and non-adhesive, and the product itself is easy to clean, while taking away a lot of heat generated during the process
4. Good resistance to foreign oil---It is incompatible with foreign oils such as guide rail oil and anti-rust oil, and the surface floating oil is easy to skim
5. Safety and environmental protection---This product does not contain harmful substances such as phenol, chlorine, nitrite, etc., protects personnel health, and is a neutral system with good adaptability to human skin.
6. Good resistance to hard water, can adapt to hard water with a hardness of more than 5000ppm
7. Good sedimentation---It can effectively settle the grinding chips to avoid secondary grinding and damage to the grinding wheel.
Scope of application:
Fully synthetic magnesium alloy cutting fluid is suitable for the processing of various magnesium alloys, aluminum alloys and zinc alloys.
It can be used for turning, cutting, grinding and drilling.
Precautions:
Customers can choose the appropriate water-to-water ratio according to their own processing material requirements to reduce waste. Generally, the higher the concentration, the better the anti-rust and lubrication effect.
It is normal for the original liquid to have a slight yellowing appearance after being stored for a long time, which will not affect the processing effect
Do not mix it with other cutting fluids when using it. When adding liquid, please add the original liquid and water in proportion. Do not add water directly.
Technical indicators:
Test items | Detection method | Performance indicators |
Appearance | Visual inspection | Light yellow transparent liquid |
5% dilution pH | GB/T 6144-2010 | 8.1±0.3 |
Refractometer coefficient | BRIX concentration meter method | 2.3±0.2 |
Corrosion test/single chip | GB/T 6144-2010 | Grade 1 (rust-free) |
Performance advantages:
1. Excellent magnesium alloy protection performance---Adopting advanced neutral formula system, good magnesium alloy protection
2. Good lubrication performance---Adding high-efficiency lubricating extreme pressure additives with excellent system facilitates its good lubrication effect, which can make the workpiece obtain excellent surface finish; non-stick tool, not easy to produce built-up edge, effectively prolong the service life of the tool. Applicable to tapping and drilling
3. Good cooling and cleaning performance---During the cutting and grinding process, it can effectively clean the debris generated during the process, ensuring that the machine and product surface are clean and non-adhesive, and the product itself is easy to clean, while taking away a lot of heat generated during the process
4. Good resistance to foreign oil---It is incompatible with foreign oils such as guide rail oil and anti-rust oil, and the surface floating oil is easy to skim
5. Safety and environmental protection---This product does not contain harmful substances such as phenol, chlorine, nitrite, etc., protects personnel health, and is a neutral system with good adaptability to human skin.
6. Good resistance to hard water, can adapt to hard water with a hardness of more than 5000ppm
7. Good sedimentation---It can effectively settle the grinding chips to avoid secondary grinding and damage to the grinding wheel.
Scope of application:
Fully synthetic magnesium alloy cutting fluid is suitable for the processing of various magnesium alloys, aluminum alloys and zinc alloys.
It can be used for turning, cutting, grinding and drilling.
Precautions:
Customers can choose the appropriate water-to-water ratio according to their own processing material requirements to reduce waste. Generally, the higher the concentration, the better the anti-rust and lubrication effect.
It is normal for the original liquid to have a slight yellowing appearance after being stored for a long time, which will not affect the processing effect
Do not mix it with other cutting fluids when using it. When adding liquid, please add the original liquid and water in proportion. Do not add water directly.
Technical indicators:
Test items | Detection method | Performance indicators |
Appearance | Visual inspection | Light yellow transparent liquid |
5% dilution pH | GB/T 6144-2010 | 8.1±0.3 |
Refractometer coefficient | BRIX concentration meter method | 2.3±0.2 |
Corrosion test/single chip | GB/T 6144-2010 | Grade 1 (rust-free) |