{pboot:if('

Performance advantages:
        1. Provide excellent lubricity during high-speed rolling, reduce roll loss and energy consumption.
        2. With a stable emulsification system, it can ensure uniform water-free spreadability during strip rolling and control the morphology of the strip.
        3. The compounded additive system provides excellent lubrication and anti-rust properties.
        4. Excellent iron chip dispersion ability, improve the surface quality of strip products.

Main Application:
        A new type of rolling oil suitable for non-heating system and hard water resistance. It is suitable for the rolling of high-quality strip steel on high-speed rolling mills, especially the rolling of stainless steel, silicon steel and high-strength steel. It effectively reduces the rolling force under high speed and high pressure, and has excellent lubricity, good rust resistance and excellent surface finish.

Product Storage:
        Any lubricating product should be stored indoors or under a shelter; when outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion and prevent the mark on the oil barrel from being eroded. When the temperature is above the freezing point, the container should be sealed and covered. When handling containers and products, operators should avoid contact with oil products. Maintain good personal hygiene. If prolonged or repeated contact is possible, protective clothing and glasses should be worn. Health, safety and environmental protection products are harmless to health and safety when used correctly.

Daily maintenance of solution:
        1. For normal use of emulsion, it must be well maintained. It is recommended to measure the concentration every day to keep it within the appropriate range. If the concentration is lower than the lower limit or a whistling sound occurs during rolling (indicating a serious decrease in lubricity), the stock solution should be added in time. If residues accumulate on the surface of the product (especially foggy streaks after return), it indicates that the concentration is too high and the concentration should be reduced.
        2. When black oily substances appear on the surface of the rolling liquid or oily spots appear on the surface of the product, and black sticky substances appear, the solution in the liquid tank should be completely replaced, otherwise, it will affect the product quality and equipment life.

Precautions:
        1. During the preparation process of this product, or when it is lubricated by spraying, if foam is generated in the initial use, this is a normal phenomenon, which will disappear by itself after a few days of use.
        2. For equipment that originally used saponified liquid, emulsified oil and had a circulation system, the color of the lubricant will turn dark brown for a short time in the early stage after switching to this product. This is the result of this product's strong cleaning ability, which cleans the oil stains on the equipment and molds, and does not affect normal use and product quality.
        3. This product cannot be mixed with lubricating oils from different manufacturers. After opening the barrel, the unused part should be covered and sealed in time.
        4. In an environment with low temperature, this product may have problems such as poor fluidity, a small amount of solid precipitation at the bottom, and difficulty in pouring out. This is a normal phenomenon and does not affect the performance of the product itself. The unopened barrel can be soaked and heated to above 35°C for four hours to restore it to a homogeneous clear liquid.

 

Typical data:

Viscosity V 40℃	35-45
PH	5.7-7.5
Flash point℃	200
Density g/cm³ @20℃	0.87-0.93
Saponification value mg KOH/g	190-210
Acid value mg KOH/g	<10

'!='')}

Stainless steel rolling coolant

{/pboot:if} {pboot:if('

Performance advantages:
        1. Provide excellent lubricity during high-speed rolling, reduce roll loss and energy consumption.
        2. With a stable emulsification system, it can ensure uniform water-free spreadability during strip rolling and control the morphology of the strip.
        3. The compounded additive system provides excellent lubrication and anti-rust properties.
        4. Excellent iron chip dispersion ability, improve the surface quality of strip products.

Main Application:
        A new type of rolling oil suitable for non-heating system and hard water resistance. It is suitable for the rolling of high-quality strip steel on high-speed rolling mills, especially the rolling of stainless steel, silicon steel and high-strength steel. It effectively reduces the rolling force under high speed and high pressure, and has excellent lubricity, good rust resistance and excellent surface finish.

Product Storage:
        Any lubricating product should be stored indoors or under a shelter; when outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion and prevent the mark on the oil barrel from being eroded. When the temperature is above the freezing point, the container should be sealed and covered. When handling containers and products, operators should avoid contact with oil products. Maintain good personal hygiene. If prolonged or repeated contact is possible, protective clothing and glasses should be worn. Health, safety and environmental protection products are harmless to health and safety when used correctly.

Daily maintenance of solution:
        1. For normal use of emulsion, it must be well maintained. It is recommended to measure the concentration every day to keep it within the appropriate range. If the concentration is lower than the lower limit or a whistling sound occurs during rolling (indicating a serious decrease in lubricity), the stock solution should be added in time. If residues accumulate on the surface of the product (especially foggy streaks after return), it indicates that the concentration is too high and the concentration should be reduced.
        2. When black oily substances appear on the surface of the rolling liquid or oily spots appear on the surface of the product, and black sticky substances appear, the solution in the liquid tank should be completely replaced, otherwise, it will affect the product quality and equipment life.

Precautions:
        1. During the preparation process of this product, or when it is lubricated by spraying, if foam is generated in the initial use, this is a normal phenomenon, which will disappear by itself after a few days of use.
        2. For equipment that originally used saponified liquid, emulsified oil and had a circulation system, the color of the lubricant will turn dark brown for a short time in the early stage after switching to this product. This is the result of this product's strong cleaning ability, which cleans the oil stains on the equipment and molds, and does not affect normal use and product quality.
        3. This product cannot be mixed with lubricating oils from different manufacturers. After opening the barrel, the unused part should be covered and sealed in time.
        4. In an environment with low temperature, this product may have problems such as poor fluidity, a small amount of solid precipitation at the bottom, and difficulty in pouring out. This is a normal phenomenon and does not affect the performance of the product itself. The unopened barrel can be soaked and heated to above 35°C for four hours to restore it to a homogeneous clear liquid.

 

Typical data:

Viscosity V 40℃	35-45
PH	5.7-7.5
Flash point℃	200
Density g/cm³ @20℃	0.87-0.93
Saponification value mg KOH/g	190-210
Acid value mg KOH/g	<10

'!='')}

{/pboot:if}

Performance advantages:
        1. Provide excellent lubricity during high-speed rolling, reduce roll loss and energy consumption.
        2. With a stable emulsification system, it can ensure uniform water-free spreadability during strip rolling and control the morphology of the strip.
        3. The compounded additive system provides excellent lubrication and anti-rust properties.
        4. Excellent iron chip dispersion ability, improve the surface quality of strip products.

Main Application:
        A new type of rolling oil suitable for non-heating system and hard water resistance. It is suitable for the rolling of high-quality strip steel on high-speed rolling mills, especially the rolling of stainless steel, silicon steel and high-strength steel. It effectively reduces the rolling force under high speed and high pressure, and has excellent lubricity, good rust resistance and excellent surface finish.

Product Storage:
        Any lubricating product should be stored indoors or under a shelter; when outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion and prevent the mark on the oil barrel from being eroded. When the temperature is above the freezing point, the container should be sealed and covered. When handling containers and products, operators should avoid contact with oil products. Maintain good personal hygiene. If prolonged or repeated contact is possible, protective clothing and glasses should be worn. Health, safety and environmental protection products are harmless to health and safety when used correctly.

Daily maintenance of solution:
        1. For normal use of emulsion, it must be well maintained. It is recommended to measure the concentration every day to keep it within the appropriate range. If the concentration is lower than the lower limit or a whistling sound occurs during rolling (indicating a serious decrease in lubricity), the stock solution should be added in time. If residues accumulate on the surface of the product (especially foggy streaks after return), it indicates that the concentration is too high and the concentration should be reduced.
        2. When black oily substances appear on the surface of the rolling liquid or oily spots appear on the surface of the product, and black sticky substances appear, the solution in the liquid tank should be completely replaced, otherwise, it will affect the product quality and equipment life.

Precautions:
        1. During the preparation process of this product, or when it is lubricated by spraying, if foam is generated in the initial use, this is a normal phenomenon, which will disappear by itself after a few days of use.
        2. For equipment that originally used saponified liquid, emulsified oil and had a circulation system, the color of the lubricant will turn dark brown for a short time in the early stage after switching to this product. This is the result of this product's strong cleaning ability, which cleans the oil stains on the equipment and molds, and does not affect normal use and product quality.
        3. This product cannot be mixed with lubricating oils from different manufacturers. After opening the barrel, the unused part should be covered and sealed in time.
        4. In an environment with low temperature, this product may have problems such as poor fluidity, a small amount of solid precipitation at the bottom, and difficulty in pouring out. This is a normal phenomenon and does not affect the performance of the product itself. The unopened barrel can be soaked and heated to above 35°C for four hours to restore it to a homogeneous clear liquid.

 

Typical data:

Viscosity V 40℃	35-45
PH	5.7-7.5
Flash point℃	200
Density g/cm³ @20℃	0.87-0.93
Saponification value mg KOH/g	190-210
Acid value mg KOH/g	<10