Petroleum solvent cleaning agent
Application：
1. This product is refined from natural petroleum. This product is composed of carbon chain alkanes and has good chemical stability.
2. The appearance is colorless and transparent liquid, with good cleaning properties and no corrosion to various metal materials.
3. The series of products are divided into three types according to different cleaning purposes:
4. Suitable for manual wiping of plastic surfaces or other quick-drying surfaces.
5. Strong cleaning power, suitable for soaking hardware parts
Product Introduction
Petroleum solvent cleaning agent
Performance advantages:
1. Strong dissolving power for oil stains---low conductivity, non-polar solvent, has a special affinity for non-polar oil stains, dissolves quickly, can quickly dissolve and peel off the oil stains on the surface, and achieve an ideal cleaning effect.
2. No corrosion to metal and plastic surfaces---no water and high electrical insulation, will not cause most coatings and plastics to expand and deform.
3. Low cost---as a petroleum-related product, the supply source is stable and the price is economical.
4. Easy to operate---can be used for manual wiping and soaking cleaning.
Main uses:
1. Widely used for stain cleaning in the processing of electronics, steel, copper, aluminum, zinc, stainless steel, magnesium alloy and other products.
2. Equipment maintenance: soak the mold and wipe the machine.
3. Wipe before and after spraying.
Notes:
1. Clean by soaking, wiping, etc.
2. Do not allow this product to come into contact with eyes. If it splashes into eyes accidentally, lift the eyelids and rinse with running water or saline;
3. Do not swallow this product; if swallowed accidentally, do not induce vomiting, keep resting, and seek medical care in time;
4. To prevent excessive skin degreasing, please wear chemical-resistant gloves during operation;
5. The containers and pipelines containing this product must be clean and do not mix with other solvents;
6. This product may burn when exposed to open flames or high heat. Avoid direct sunlight. Take anti-static measures in the place of use.
7. The workplace where this product is used must be well ventilated.
Typical data:
Appearance | colorless liquid |
Relative density (water) | 0.75 |
Saturated vapor pressure (kPa) | 5.33 |
Lower explosion limit (%v/v) | 0.3 |
Melting point (℃) | -60 |
Flash point (℃) | 65 |
Critical temperature (℃) | 286 |
Solubility | Insoluble in water, soluble in ethanol and ether |
Boiling point (℃) | 150-205 |
Ignition temperature (℃) | 302.4 |
Explosion limit (%v/v) | 4.3 |