Environmentally friendly hydrocarbon cleaning solvent
产品应用：
1、本产品属于定制型复合碳氢溶剂类产品，具有性价比高，清洗力优异，气味较低，闪点较高，挥发均匀，无挥发后的水痕、无机械杂质等特点，兼具一定的指纹去除能力。
2、本品闭口闪点大于60℃，不属于危险化学品，对储存和运输等要求较低。大幅降低安全隐患及储藏压力。
3、本品无毒至低毒，不含正己烷，不添加卤代烃，高度环保。
产品介绍
Performance advantages:
1. High cost performance: Our company customizes through strategic cooperation. After mass production, the main material has the advantages of high quality and low price. Therefore, this product has many advantages such as high purity, low odor, high flash point, and good solubility.
2. Good cleaning power: Our company has more than ten years of R&D experience and on-site service experience in the hydrocarbon cleaning industry. After precise compounding and verification, this product has higher cleaning power than ordinary hydrocarbons. It also has a good removal effect on lighter fingerprints.
3. Non-hazardous chemicals: The closed cup flash point is greater than 60°C, which is not a hazardous chemical, reducing safety hazards in the production, storage and use process, and reducing the pressure of enterprise safety inspections.
4. Fast evaporation: The evaporation speed is faster than that of most non-hazardous hydrocarbon cleaning agents with a flash point greater than 60°C on the market, and is close to that of ordinary environmentally friendly hydrocarbons with a closed flash point of 45°C.
5. Low odor: Compared with conventional products with a closed flash point of less than 70°C, this product has a lower odor. It can greatly reduce the negative emotions of workers towards the smell of solvents.
6. High recovery rate and long life: High-purity hydrocarbon products have the advantages of high recovery efficiency, so they have a longer service life.
7. Environmental protection: It complies with the EU ROHS standard and REACH environmental protection specification, does not destroy ozone, and meets the environmental protection standards of various countries.
8. No corrosion to metal and plastic surfaces: It does not contain water and has high electrical insulation. It will not corrode metals and will not cause most coatings and plastics to expand and deform.
9. Easy waste liquid treatment: Since it is a combustible product, the waste liquid can usually be burned. Hydrocarbon solvent waste can also be recovered by distillation.
Main Applications:
1. Widely used for cleaning stains in the processing of electronics, steel, copper, aluminum, zinc, stainless steel, magnesium alloy and other products. Including but not limited to machine tools: cleaning of ball bearings, molds, screws, gears and other metal processing parts; metal: cleaning of copper, aluminum, stainless steel and other metal rolled sheets and standard parts; electroplating and painting: cleaning of metal products and resin products before electroplating and painting
2. Widely replace traditional environmentally unfriendly chlorinated hydrocarbon cleaning agents, and replace hazardous chemical hydrocarbon solvents with a flash point of ≤60℃.
Notes:
1. When cleaning rust-prone metals, please do a rust-proof test in advance to test the rust-proof time of the corresponding material under your company's storage process.
2. Do not allow this product to come into contact with eyes. If it splashes into eyes accidentally, lift the eyelids and rinse with running water or saline.
3. Do not swallow this product: If swallowed accidentally, do not induce vomiting, keep resting, and seek medical care in time.
4. To prevent excessive skin degreasing, please wear chemical-resistant gloves during operation.
5. The containers and pipelines containing this product must be clean and do not mix with other solvents.
6. This product is flammable. Avoid open flames, high temperatures, and direct sunlight. Take anti-static measures in the place of use.
7. The product is flammable and explosive. Smoking is strictly prohibited at the work site.
8. The workplace where this product is used requires good ventilation.
Typical data:
Appearance | colorless transparent liquid |
closed flash point | >60℃ |
Density g/cm³(20℃) | 0.75±0.05 |
Initial boiling point HK℃ | ≥180 |
Final boiling point KK℃ | ≤210 |
Kinematic viscosity mm²/s(40℃) | 1.0~1.5 |
Aromatic hydrocarbon content (m/m)/% | ≤0.2 |
Mechanical impurities and moisture | none |
Use concentration | Original solution |
working temperature | The recommended temperature for open environment is room temperature, and the recommended temperature for closed environment is 50~55℃ |
Rust resistance | No rust in anaerobic immersion, not easy to rust in sealed conditions after drying |
Toxic and harmful inspection | Non-toxic to low toxicity |
Biodegradability | Fully biodegradable |
Environmental protection indicators | Complies with EU ROHS and REACH environmental standards. |
Cleaning material | Can be used for most metals, some Plastic |
Cleaning process | Suitable for soaking, hand washing, ultrasonic, spraying, vacuum cleaning, etc. |
Environmentally friendly hydrocarbon cleaning solvent
{/pboot:if} {pboot:if('Performance advantages:
1. High cost performance: Our company customizes through strategic cooperation. After mass production, the main material has the advantages of high quality and low price. Therefore, this product has many advantages such as high purity, low odor, high flash point, and good solubility.
2. Good cleaning power: Our company has more than ten years of R&D experience and on-site service experience in the hydrocarbon cleaning industry. After precise compounding and verification, this product has higher cleaning power than ordinary hydrocarbons. It also has a good removal effect on lighter fingerprints.
3. Non-hazardous chemicals: The closed cup flash point is greater than 60°C, which is not a hazardous chemical, reducing safety hazards in the production, storage and use process, and reducing the pressure of enterprise safety inspections.
4. Fast evaporation: The evaporation speed is faster than that of most non-hazardous hydrocarbon cleaning agents with a flash point greater than 60°C on the market, and is close to that of ordinary environmentally friendly hydrocarbons with a closed flash point of 45°C.
5. Low odor: Compared with conventional products with a closed flash point of less than 70°C, this product has a lower odor. It can greatly reduce the negative emotions of workers towards the smell of solvents.
6. High recovery rate and long life: High-purity hydrocarbon products have the advantages of high recovery efficiency, so they have a longer service life.
7. Environmental protection: It complies with the EU ROHS standard and REACH environmental protection specification, does not destroy ozone, and meets the environmental protection standards of various countries.
8. No corrosion to metal and plastic surfaces: It does not contain water and has high electrical insulation. It will not corrode metals and will not cause most coatings and plastics to expand and deform.
9. Easy waste liquid treatment: Since it is a combustible product, the waste liquid can usually be burned. Hydrocarbon solvent waste can also be recovered by distillation.
Main Applications:
1. Widely used for cleaning stains in the processing of electronics, steel, copper, aluminum, zinc, stainless steel, magnesium alloy and other products. Including but not limited to machine tools: cleaning of ball bearings, molds, screws, gears and other metal processing parts; metal: cleaning of copper, aluminum, stainless steel and other metal rolled sheets and standard parts; electroplating and painting: cleaning of metal products and resin products before electroplating and painting
2. Widely replace traditional environmentally unfriendly chlorinated hydrocarbon cleaning agents, and replace hazardous chemical hydrocarbon solvents with a flash point of ≤60℃.
Notes:
1. When cleaning rust-prone metals, please do a rust-proof test in advance to test the rust-proof time of the corresponding material under your company's storage process.
2. Do not allow this product to come into contact with eyes. If it splashes into eyes accidentally, lift the eyelids and rinse with running water or saline.
3. Do not swallow this product: If swallowed accidentally, do not induce vomiting, keep resting, and seek medical care in time.
4. To prevent excessive skin degreasing, please wear chemical-resistant gloves during operation.
5. The containers and pipelines containing this product must be clean and do not mix with other solvents.
6. This product is flammable. Avoid open flames, high temperatures, and direct sunlight. Take anti-static measures in the place of use.
7. The product is flammable and explosive. Smoking is strictly prohibited at the work site.
8. The workplace where this product is used requires good ventilation.
Typical data:
Appearance | colorless transparent liquid |
closed flash point | >60℃ |
Density g/cm³(20℃) | 0.75±0.05 |
Initial boiling point HK℃ | ≥180 |
Final boiling point KK℃ | ≤210 |
Kinematic viscosity mm²/s(40℃) | 1.0~1.5 |
Aromatic hydrocarbon content (m/m)/% | ≤0.2 |
Mechanical impurities and moisture | none |
Use concentration | Original solution |
working temperature | The recommended temperature for open environment is room temperature, and the recommended temperature for closed environment is 50~55℃ |
Rust resistance | No rust in anaerobic immersion, not easy to rust in sealed conditions after drying |
Toxic and harmful inspection | Non-toxic to low toxicity |
Biodegradability | Fully biodegradable |
Environmental protection indicators | Complies with EU ROHS and REACH environmental standards. |
Cleaning material | Can be used for most metals, some Plastic |
Cleaning process | Suitable for soaking, hand washing, ultrasonic, spraying, vacuum cleaning, etc. |
Performance advantages:
1. High cost performance: Our company customizes through strategic cooperation. After mass production, the main material has the advantages of high quality and low price. Therefore, this product has many advantages such as high purity, low odor, high flash point, and good solubility.
2. Good cleaning power: Our company has more than ten years of R&D experience and on-site service experience in the hydrocarbon cleaning industry. After precise compounding and verification, this product has higher cleaning power than ordinary hydrocarbons. It also has a good removal effect on lighter fingerprints.
3. Non-hazardous chemicals: The closed cup flash point is greater than 60°C, which is not a hazardous chemical, reducing safety hazards in the production, storage and use process, and reducing the pressure of enterprise safety inspections.
4. Fast evaporation: The evaporation speed is faster than that of most non-hazardous hydrocarbon cleaning agents with a flash point greater than 60°C on the market, and is close to that of ordinary environmentally friendly hydrocarbons with a closed flash point of 45°C.
5. Low odor: Compared with conventional products with a closed flash point of less than 70°C, this product has a lower odor. It can greatly reduce the negative emotions of workers towards the smell of solvents.
6. High recovery rate and long life: High-purity hydrocarbon products have the advantages of high recovery efficiency, so they have a longer service life.
7. Environmental protection: It complies with the EU ROHS standard and REACH environmental protection specification, does not destroy ozone, and meets the environmental protection standards of various countries.
8. No corrosion to metal and plastic surfaces: It does not contain water and has high electrical insulation. It will not corrode metals and will not cause most coatings and plastics to expand and deform.
9. Easy waste liquid treatment: Since it is a combustible product, the waste liquid can usually be burned. Hydrocarbon solvent waste can also be recovered by distillation.
Main Applications:
1. Widely used for cleaning stains in the processing of electronics, steel, copper, aluminum, zinc, stainless steel, magnesium alloy and other products. Including but not limited to machine tools: cleaning of ball bearings, molds, screws, gears and other metal processing parts; metal: cleaning of copper, aluminum, stainless steel and other metal rolled sheets and standard parts; electroplating and painting: cleaning of metal products and resin products before electroplating and painting
2. Widely replace traditional environmentally unfriendly chlorinated hydrocarbon cleaning agents, and replace hazardous chemical hydrocarbon solvents with a flash point of ≤60℃.
Notes:
1. When cleaning rust-prone metals, please do a rust-proof test in advance to test the rust-proof time of the corresponding material under your company's storage process.
2. Do not allow this product to come into contact with eyes. If it splashes into eyes accidentally, lift the eyelids and rinse with running water or saline.
3. Do not swallow this product: If swallowed accidentally, do not induce vomiting, keep resting, and seek medical care in time.
4. To prevent excessive skin degreasing, please wear chemical-resistant gloves during operation.
5. The containers and pipelines containing this product must be clean and do not mix with other solvents.
6. This product is flammable. Avoid open flames, high temperatures, and direct sunlight. Take anti-static measures in the place of use.
7. The product is flammable and explosive. Smoking is strictly prohibited at the work site.
8. The workplace where this product is used requires good ventilation.
Typical data:
Appearance | colorless transparent liquid |
closed flash point | >60℃ |
Density g/cm³(20℃) | 0.75±0.05 |
Initial boiling point HK℃ | ≥180 |
Final boiling point KK℃ | ≤210 |
Kinematic viscosity mm²/s(40℃) | 1.0~1.5 |
Aromatic hydrocarbon content (m/m)/% | ≤0.2 |
Mechanical impurities and moisture | none |
Use concentration | Original solution |
working temperature | The recommended temperature for open environment is room temperature, and the recommended temperature for closed environment is 50~55℃ |
Rust resistance | No rust in anaerobic immersion, not easy to rust in sealed conditions after drying |
Toxic and harmful inspection | Non-toxic to low toxicity |
Biodegradability | Fully biodegradable |
Environmental protection indicators | Complies with EU ROHS and REACH environmental standards. |
Cleaning material | Can be used for most metals, some Plastic |
Cleaning process | Suitable for soaking, hand washing, ultrasonic, spraying, vacuum cleaning, etc. |