{pboot:if('

Performance advantages:
        1. Strong cleaning performance: Contains patented active agents, which can easily remove dirty particles, dirt and grease, etc., and has a good cleaning effect on common mechanical lubricants, cutting oils, or difficult-to-clean anti-rust oils and stretch forming oils.
        2. Thorough cleaning: Good wetting and dispersibility, easy to rinse, no residue on the surface of the workpiece, especially suitable for precision cleaning.
        3. Protect workers' health: does not contain harmful ingredients, the pH value is weakly alkaline, no irritation to the skin, provides better cleaning performance, and protects the health of users.
        4. Low impact on the environment: does not contain controlled substances such as heavy metals; no flash point, no harmful substances that need to be specially marked in the composition, in line with the EU ROHS environmental protection standards. And do not use the phosphorus-containing additives commonly used in conventional water-soluble cleaning agents. The aqueous solution after cleaning can be naturally decomposed, which will reduce the impact on the environment.
        5. Flexible use: can be cleaned at room temperature or heated, can be washed by hand, ultrasonic cleaning, strong adaptability to water, easy to use.

Main use:
        Widely used in degreasing and cleaning of mechanical parts, hardware materials, machine tools, vehicle engines, factory oil pollution, etc.
        It is especially recommended for precision cleaning of workpiece surface after water-based cutting and grinding fluid processing of metal materials, galvanized sheet stamping oil, etc.

Precautions:
        1. Ultrasonic cleaning: In order to obtain better cleaning effect, according to the cleaning object and the degree of oil pollution, the stock solution and water are mixed at a ratio of 1:10; heating to 50-60℃ can quickly remove oil and dirt. After cleaning for 3-5 minutes, rinse with city (pure) water and then dry.
        2. If the workpiece to be cleaned has a long-term anti-rust and anti-oxidation requirement, it is strongly recommended to do a simulated on-site oxidation or anti-rust experiment first. Due to the differences in storage and actual operation, our company does not assume any responsibility for the final anti-rust results.
        3. In order to achieve a better cleaning effect, the recommended precision cleaning procedure is: degreasing rough washing → degreasing fine washing → city (pure) water rinsing → city (pure) water rinsing → hot air drying → packaging.
        4. The replacement of the cleaning agent is determined by the color and oil content. When the color becomes darker or turbid and the oil content is high, the cleaning agent needs to be replaced in time to avoid affecting the cleaning effect.
        5. If the operator is in contact with the cleaning agent for a long time, it is recommended to wear rubber gloves to avoid degreasing.
        6. The workpiece after cleaning should not be touched directly by hand to avoid sweat stains and rust.
        7. The waste liquid after cleaning should not be poured directly into the ditch. It is recommended to let it stand for several days, and then separate and remove the floating oil on the surface and the waste residue at the bottom before discharging.

'!='')}

Concentrated water-based environmentally friendly cleaning agent

{/pboot:if} {pboot:if('

Performance advantages:
        1. Strong cleaning performance: Contains patented active agents, which can easily remove dirty particles, dirt and grease, etc., and has a good cleaning effect on common mechanical lubricants, cutting oils, or difficult-to-clean anti-rust oils and stretch forming oils.
        2. Thorough cleaning: Good wetting and dispersibility, easy to rinse, no residue on the surface of the workpiece, especially suitable for precision cleaning.
        3. Protect workers' health: does not contain harmful ingredients, the pH value is weakly alkaline, no irritation to the skin, provides better cleaning performance, and protects the health of users.
        4. Low impact on the environment: does not contain controlled substances such as heavy metals; no flash point, no harmful substances that need to be specially marked in the composition, in line with the EU ROHS environmental protection standards. And do not use the phosphorus-containing additives commonly used in conventional water-soluble cleaning agents. The aqueous solution after cleaning can be naturally decomposed, which will reduce the impact on the environment.
        5. Flexible use: can be cleaned at room temperature or heated, can be washed by hand, ultrasonic cleaning, strong adaptability to water, easy to use.

Main use:
        Widely used in degreasing and cleaning of mechanical parts, hardware materials, machine tools, vehicle engines, factory oil pollution, etc.
        It is especially recommended for precision cleaning of workpiece surface after water-based cutting and grinding fluid processing of metal materials, galvanized sheet stamping oil, etc.

Precautions:
        1. Ultrasonic cleaning: In order to obtain better cleaning effect, according to the cleaning object and the degree of oil pollution, the stock solution and water are mixed at a ratio of 1:10; heating to 50-60℃ can quickly remove oil and dirt. After cleaning for 3-5 minutes, rinse with city (pure) water and then dry.
        2. If the workpiece to be cleaned has a long-term anti-rust and anti-oxidation requirement, it is strongly recommended to do a simulated on-site oxidation or anti-rust experiment first. Due to the differences in storage and actual operation, our company does not assume any responsibility for the final anti-rust results.
        3. In order to achieve a better cleaning effect, the recommended precision cleaning procedure is: degreasing rough washing → degreasing fine washing → city (pure) water rinsing → city (pure) water rinsing → hot air drying → packaging.
        4. The replacement of the cleaning agent is determined by the color and oil content. When the color becomes darker or turbid and the oil content is high, the cleaning agent needs to be replaced in time to avoid affecting the cleaning effect.
        5. If the operator is in contact with the cleaning agent for a long time, it is recommended to wear rubber gloves to avoid degreasing.
        6. The workpiece after cleaning should not be touched directly by hand to avoid sweat stains and rust.
        7. The waste liquid after cleaning should not be poured directly into the ditch. It is recommended to let it stand for several days, and then separate and remove the floating oil on the surface and the waste residue at the bottom before discharging.

'!='')}

{/pboot:if}

Performance advantages:
        1. Strong cleaning performance: Contains patented active agents, which can easily remove dirty particles, dirt and grease, etc., and has a good cleaning effect on common mechanical lubricants, cutting oils, or difficult-to-clean anti-rust oils and stretch forming oils.
        2. Thorough cleaning: Good wetting and dispersibility, easy to rinse, no residue on the surface of the workpiece, especially suitable for precision cleaning.
        3. Protect workers' health: does not contain harmful ingredients, the pH value is weakly alkaline, no irritation to the skin, provides better cleaning performance, and protects the health of users.
        4. Low impact on the environment: does not contain controlled substances such as heavy metals; no flash point, no harmful substances that need to be specially marked in the composition, in line with the EU ROHS environmental protection standards. And do not use the phosphorus-containing additives commonly used in conventional water-soluble cleaning agents. The aqueous solution after cleaning can be naturally decomposed, which will reduce the impact on the environment.
        5. Flexible use: can be cleaned at room temperature or heated, can be washed by hand, ultrasonic cleaning, strong adaptability to water, easy to use.

Main use:
        Widely used in degreasing and cleaning of mechanical parts, hardware materials, machine tools, vehicle engines, factory oil pollution, etc.
        It is especially recommended for precision cleaning of workpiece surface after water-based cutting and grinding fluid processing of metal materials, galvanized sheet stamping oil, etc.

Precautions:
        1. Ultrasonic cleaning: In order to obtain better cleaning effect, according to the cleaning object and the degree of oil pollution, the stock solution and water are mixed at a ratio of 1:10; heating to 50-60℃ can quickly remove oil and dirt. After cleaning for 3-5 minutes, rinse with city (pure) water and then dry.
        2. If the workpiece to be cleaned has a long-term anti-rust and anti-oxidation requirement, it is strongly recommended to do a simulated on-site oxidation or anti-rust experiment first. Due to the differences in storage and actual operation, our company does not assume any responsibility for the final anti-rust results.
        3. In order to achieve a better cleaning effect, the recommended precision cleaning procedure is: degreasing rough washing → degreasing fine washing → city (pure) water rinsing → city (pure) water rinsing → hot air drying → packaging.
        4. The replacement of the cleaning agent is determined by the color and oil content. When the color becomes darker or turbid and the oil content is high, the cleaning agent needs to be replaced in time to avoid affecting the cleaning effect.
        5. If the operator is in contact with the cleaning agent for a long time, it is recommended to wear rubber gloves to avoid degreasing.
        6. The workpiece after cleaning should not be touched directly by hand to avoid sweat stains and rust.
        7. The waste liquid after cleaning should not be poured directly into the ditch. It is recommended to let it stand for several days, and then separate and remove the floating oil on the surface and the waste residue at the bottom before discharging.