Carbide grinding fluid
Application：This product is a highly lubricating, biologically stable, water-soluble, fully synthetic grinding fluid. It has good cooling, lubricating, and rust-proof functions, and is safe and non-toxic. Using this product can achieve an ideal grinding effect on the surface of cemented carbide, effectively extend the rust-proof time of the tool, and is very helpful for inhibiting cobalt ions. The recommended water-to-water ratio is 1:10-1:20 (the specific concentration depends on the working conditions, and generally the higher the concentration, the better the lubrication and rust-proof performance).
Product Introduction
Carbide grinding fluid
Performance advantages:
1. The fully synthetic system does not contain mineral oil, and the diluent is transparent, which is convenient for observing the processing status.
2. Extremely low foam inhibition, no need to worry about foam problems in subsequent use.
3. The super antibacterial performance can easily exceed 1 year in a strict stand-alone environment, and the centralized liquid supply system can reach a service life of more than 2 years.
4. This product does not contain sodium nitrite/triethanolamine and other ingredients, and has a good inhibitory effect on the precipitation of cobalt ions.
Main Application:
Grinding and cutting of various carbide tools;
Grinding and cutting of some ferrous metals such as cast iron/carbon steel/stainless steel.
Typical data:
Appearance (original solution) | Yellow transparent liquid |
5% diluent pH value | 9.2±0.5 |
Refractometer coefficient | 2.5±0.5 |
Corrosion test/single chip | Grade 1 (rust-free) |
Sodium nitrite content | none |