Titanium alloy cutting coolant
Application：This product is a water-soluble titanium alloy cutting fluid with high lubricity and stable biological properties. It has good cooling, lubrication, and rust prevention functions, and is safe and non-toxic. Using this product can achieve ideal titanium alloy processing effects, improve the surface finish and processing efficiency, and extend the service life of the tool. This product can also be used in stainless steel and aluminum alloy processing. The recommended water-to-water ratio is 1:5-1:10 (the specific concentration depends on the working conditions. Generally, the higher the concentration, the better the lubrication and rust prevention performance).
Product Introduction
Titanium alloy cutting coolant
Performance advantages:
1. Good extreme pressure lubrication performance and excellent anti-corrosion and oxidation properties.
2. Extremely low foam inhibition, no need to worry about foam problems in subsequent use.
3. This product does not contain harmful ingredients such as sodium nitrite, formaldehyde, halogen, etc.
Scope of application:
Titanium alloy cutting coolant Titanium alloy processing heavy load 20-30%, medium to light load 10-20%, the added concentration is about 10%.
The pH value of the working fluid is maintained at 8.2-9.5, try to prevent the contamination of miscellaneous oil impurities, and maintain the normal replenishment of the liquid level.
Precautions:
Customers can choose the appropriate water ratio according to their own processing material requirements to reduce waste. Generally, the higher the concentration, the better the anti-rust and lubrication effect.
It is normal for the original liquid to slightly yellow after long storage time, which will not affect the processing effect.
Do not mix with other cutting fluids when using. When adding liquid, please add the original liquid and water in proportion, and do not add water directly.
Technical indicators:
Test items | Performance indicators |
Appearance (original solution) | Yellow transparent liquid |
5% dilution pH | 9.0±0.5 |
Refractometer coefficient | 1.1±0.1 |
Copper corrosion test/single piece | 1A (rust-free) |