Titanium alloy cutting oil
Application：This product is a multi-purpose cutting oil made from paraffin-based oil, containing high-efficiency extreme pressure agents, antioxidants, rust inhibitors and fogging inhibitors. Its quality meets Japanese JIS K2241-2-3 standards.
Product Introduction
Titanium alloy cutting oil
Performance advantages:
1. High-grade pure oil cutting fluid, containing a large amount of fat friction reducers and high-tech extreme pressure additives.
2. Dark ultra-concentrated formula, can also be diluted for cutting and processing of general materials.
3. High lubricity and high wear resistance coexist, for materials with high hardness and high toughness, it provides high-quality sequence reduction performance, can make chips fall off in layers, reduce the wear of expensive tools, save costs, and show magical effects, and can provide good processing finish.
Main Application:
1. Specially designed for large feed rate, low speed, heavy load cutting.
2. Specially designed for all difficult-to-cut materials.
3. Successfully used for aerospace titanium alloy, titanium aluminum alloy and other super-difficult-to-cut materials for many years.
4. Used for precision machining of 400 series stainless steel, such as watch cases and accessories.
Typical data:
project | Typical value |
Kinematic viscosity 40℃ | 30-55 |
Flash point℃ | ≥170 |
Pour point℃ | ≥-10 |
Corrosion (100℃, 3h) | qualified |
Sintering load PD (N) | 4396 |
Appearance | light yellow transparent |