Environmentally friendly water-based cleaning agent

Performance advantages:
        1. Strong cleaning performance: Contains patented active agents, which can easily remove dirty particles, dirt and grease.
        2. Long-lasting effect: Polignant is a super concentrated formula.
        3. Protect workers' health: It does not contain harmful ingredients, has a weakly alkaline pH value, is non-irritating to the skin, provides excellent cleaning performance, and protects the health of users.
        4. Low impact on the environment: It does not contain controlled substances such as heavy metals; it has no flash point, and there are no harmful substances that need to be specially marked in the composition, which complies with the EU ROHS environmental protection standards. And it does not use phosphorus-containing additives commonly used in conventional water-soluble cleaning agents. The aqueous solution after cleaning can be naturally decomposed, which will reduce the impact on the environment to a minimum.
        5. Flexible use: It can be cleaned at room temperature or heated, and can be washed by hand or ultrasonically. It has strong adaptability to water and is easy to use.
        6. Thorough cleaning: Good wetting and dispersibility, easy to rinse, no residue on the surface of the workpiece, especially suitable for use in precision cleaning.

Main use:
        Especially recommended for precision cleaning of non-ferrous metal materials, semiconductors, etc.

Use:
        Ultrasonic cleaning: To achieve better cleaning results, according to the cleaning object and the degree of oil pollution, mix the stock solution with water at a ratio of 1:15-20; heating to 50-60℃ can quickly remove oil and dirt. After cleaning for 3-5 minutes, rinse with city (pure) water and then dry.

Precautions:
        1. If the workpiece to be cleaned has a long-term anti-rust and anti-oxidation requirement, it is strongly recommended to do a simulated on-site oxidation or anti-rust experiment first. Due to the difference in storage and actual operation, our company does not assume any responsibility for the final anti-rust result.
        2. In order to achieve a good cleaning effect, the recommended precision cleaning procedure is: degreasing rough washing → degreasing fine washing → city (pure) water rinsing → city (pure) water rinsing → hot air drying → packaging.
        3. The replacement of the cleaning agent is determined by the color and oil content. When the color becomes darker or turbid and the oil content is high, the cleaning agent needs to be replaced in time to avoid affecting the cleaning effect.
        4. If the operator is in contact with the cleaning agent for a long time, it is recommended to wear rubber gloves to avoid degreasing.
        5. The workpiece after cleaning cannot be directly touched by hand to avoid secondary pollution.
        6. The waste liquid after cleaning cannot be poured directly into the ditch. It is recommended to let it stand for a few days, and then separate and remove the floating oil on the surface and the waste residue at the bottom before discharging.